Eaton 93E UPS 100-400 kVA
Technical Specifications
General
Accessories
UPS output power rating (0.9 p.f.)
100 120 160 200 300 400 kVA
90 108 144 180 270 360 kW
External battery cabinets, internal manual bypass switch up to 120 kVA, external maintenance bypass switch, MiniSlot connectivity (Web/SNMP, ModBus/Jbus, Relay)
Efficiency in double conversion mode
(full load)
Distributed paralleling with Hot Sync technology
Inverter/rectifier topology
Audible noise
Altitude (max)
Dimensions W x D x H
UPS ambient service temperature
94%
4
Transformer-free IGBT with PWM
≤70dB (100-200kVA) and ≤73dB (300-400kVA) at 1 m, 75% load
1000 m without derating (max 2000 m)
600 x 800 x 1876 (mm) 100-200 kVA 1600 x 820 x 1880 (mm) 300-400 kVA
0°C to +40°C
Communications
MiniSlot
2 communication bays
Serial ports
USB, RS232
Relay inputs/outputs
Three Signal inputs
Compliance with standards
Safety (CB certified)
IEC 62040-1
EMC
IEC 62040-2, EMC Category C3
Input
Performance
IEC 62040-3
Input wiring
3 ph + neutral
Due to continuous product improvement programs, specifications are subject to change without notice.
Nominal voltage rating (configurable)
220/380, 230/400, 240/415 V 50/60 Hz
Input voltage range
+20% / -15% at 100% load +20% / -50% at 50% load
Input frequency range
42-70 Hz
Input Power Factor
0.99
Input ITHD
< 5%
Soft start capability
Yes
Internal backfeed protection
Yes
Battery
Battery type
100 120 160 200 300 400 kVA
90 108 144 180 270 360 kW
Charging method
94%
Battery nominal voltage (lead-acid)
4
Charging current / Model
Default
Max*
*May be limited by maximum UPS input current rating
100 120 160 200 300 400 kVA
20 20 20 20 20 20 A
40 40 80 80 120 160 A
Output
Output wiring
3 ph + neutral
Nominal voltage rating (configurable)
220/380, 230/400 (default), 240/415 V 50/60 Hz
Output UTHD
<2% (100% linear load)
Output power factor
0.9
Permitted load power factor
0.7 lagging – 0.9 leading
Overload on inverter
10 min 102-125% load
1 min 126-150% load
500 ms >151% load
Overload when bypass available
Continuous <115% load, 20 ms 1000% peak current. Note! External bypass fuses may limit the overload capability.
iEdgeSolutions
